YDPM系列 YDPM SERIES
閉式門型雙曲軸精密鋼架沖床 Closed double-cank precision steel frame press
—高剛性機架設計，采用優質鋼板焊制，經過消除內應力工藝處理，提高了整機精度的穩定性和可靠性能。
—With high rigidity rack desigh,they are welded with the use of high-quality steel plates,through relieving of internal stresses,so that stability and reliability of the whole machine in precision are enhanced.
性能特點 Performance feature
| 1.高剛性能機架，連桿中心跨度大，抗偏載強，優化設計。 | 1.High steel performance frame,large center span of the connecting rod, strong anti partial load,optimize desigh. | ||||||||||
| 2.為保證機器運轉的相對平穩性，采用對稱兩只平衡器裝置設計方式。 | 2.In order to guarantee relative stationarity of machineoperation,it is necessary to balance two balancers. | ||||||||||
| 3.調模精密高度0.1ｍｍ，安全、便捷、可靠。 | 3.Mouldinh-adjustment precision is as high as 0.1mm,safe,speed,and reliable. | ||||||||||
|
4.曲軸、齒輪組、連桿等部件，經硬氧化和研磨等工藝處理后， 具有極高的綜合性能和耐度性 |
4.Through hard oxdation and grinding,such parts as bent axles,gear sets,and connecting rods possess higher combination property and tolerance. | ||||||||||
|
5.采用高度靈敏、可靠的離合器/剎車器裝置和國際頂尖的雙聯電磁閥， 過載保護裝置，確保壓力機滑塊運轉及停止的精確性與安全性。 |
5.Adopt highly sensitive and reliable cluth/brake and internationally top duplex magnetic valve,as well as overload protection devices,to guarantee precision and safety for operation and stop of press rams. | ||||||||||
| 6.機器結構設計合理，便于實現自動化生產，降低成本，提高效率。 | 6.Machine's structural design shall be reasonable,for the convenience of realizing automatic production,reducing cost,and improving efficiency. | ||||||||||
| 7.先進的設計理念，低噪音，低消耗，節省能源。 | 7.Possess advance design concepts,low noise,low consumption,and energy saving. | ||||||||||
標準配置 Standard configuration
| 干式離合剎車器 | Dry clutch brake |
| 易鍛標準操作系統 | Standerd operating system of yiduan |
| 運轉模式選擇/切/寸動/安全一行程/連續 | Choice/cutting/inch/safe joumey/continuationof operating mode |
| 油壓過負荷保護裝置 | Oil pressure overload protection device |
| 二度落保護裝置 | Over-run safety device |
| 雙聯電磁閥 | Duplex magnetic valve |
| 誤送檢測裝置 | Misfeed detection consent |
| 電動滑塊調整裝置 | Electric slider adjusting device |
| 數字式模高指示器（單位0.1mm) | Digital moulding-height indicator(unit:0.1mm) |
| 電動黃油潤滑裝置 | Electric butter lubricating device |
| 累計計數器6位數 | Accumlative counter(6 digits) |
| 預調計數器6位數 | Pre-determined counter(6 digits) |
| 保養計數器6位數 | Maintenance counter(6 digits) |
| 壽命計數器6位數 | Life counter(6 digits) |
| 電子式旋轉凸輪開關預備6連 | Electionic rotatry cam switch(6 connection) |
| 噴風裝置1/2H-回路 | Air-blast device 1/2"one circuit |
| 空氣源接頭1/2－－回路 | Air source connector 1/2"two circuit |
| 誤送檢測裝置 | Error inspection socket |
| 電源插座 | Power socket |
選擇配置 Opional configuration
| 濕式離合剎車器 | Wet clutch brake |
| 模墊裝置 | Die cushion device |
| Vs變速馬達 | Vs variable-speed motor |
| 觸摸屏裝置 | Touch -screem device |
| 光電安全裝置 | Photo-electronic safety device |
| 滑塊上部頂料裝置 | Upper slider feeding device |
| 主馬達逆轉裝置 | Main motor inversion device |
| 腳踏開關 | Foot switch |
| 安全擋塊及安全插銷 | Safety dog and safety latch |
| T型雙手按鈕操作臺 | T-type two-hand button operating floor |
| 附檢知變聯電磁閥 | Inspection variable-connection magnetic valve |
| 防震機械腳 | Anti-vibration mechanical foot |
| 快速模具交換 | Rapid tooling exchange |
| 上夾模器 | Upper die clamper |
| 下夾模器 | Lower die clamper |
| 舉模器 | Die lifter |
| 移模臂 | Mould-shift arm |
| 基礎螺絲及基礎板 | Basic bolt and soleplate |
| 自動送料裝置 | Automatic feeder device |
| 三合一NC矯直機 | Three-in-one NC straightening feeder |
| NC滾輪送料機 | NC Roll feeder |
| 二合一料架兼矯直機 | Three-in-one feeder and straightening machine |
| 矯直機（整平機） | Leveller |
技術參數
| 名稱 | ?Name | 單位 | YDPM-110 | YDPM-160 | YDPM-200 | YDPM-250 | |||||
| 型式 | Model | ? | S | H | S | H | S | H | S | H | |
| 噸數 | Capacity | ton | 110 | 160 | 200 | 250 | |||||
| 沖力發生位置 | Rated tonnage point | mm? | 6 | 3 | 6 | 3 | 6 | 3 | 7 | 3 | |
| 行程 | Stroke | mm? | 180 | 110 | 180 | 130 | 250 | 150 | 280 | 170 | |
| 每分鐘行程數 | Speed changing | s.p.m | 35-65 | 50-100 | 30-55 | 40-85 | 20-50 | 35-70 | 20-40 | 30-60 | |
| 最大裝模高度 | Max.die he high? | mm? | 400 | 435 | 450 | 400 | 500 | 450 | 550 | 450 | |
| 滑塊調整量 | Slide adjustment | mm? | 100 | 100 | 120 | 120 | |||||
| 上工作臺尺寸 | Slide area | mm? | 1400×500 | 1600×650 | 1850×750 | 2300×900 | |||||
| 下工作臺尺寸 | Bolster area | mm? | 1800×650×130 | 2000×760×150 | 2400×840×170 | 2700×900×170 | |||||
| 側向開口 | Side opening | mm? | 600×500 | 700×450 | 900×600 | 900×600 | |||||
| 主電動機 | Main motor | kwxP | 11×4 | 15×4 | 18.5×4 | 22×4 | |||||
| 滑塊調整電機 | Slide adjust device | kwxP | 1×4 | 1×4 | 2×4 | 2×4 | |||||
| 使用空氣壓力 | Air pressure | Mpa | 0.6 | 0.6 | 0.6 | 0.6 | |||||
| 沖床精度 | Presses precision | ? | GB(JIS)1 class一級 | ||||||||
技術參數
| 名稱 | Name | 單位 | YDPM-300 | YDPM-400 | YDPM-500 | YDPM-600 | ||||
| 型式 | Model | ? | S | H | S | H | S | H | S | H |
| 噸數 | Capacity | ton | 300 | 400 | 500 | 600 | ||||
| 沖力發生位置 | Rated tonnage point | mm? | 7 | 3 | 7 | 3 | 10 | 6 | 10 | 6 |
| 行程 | Stroke | mm? | 300 | 170 | 300 | 170 | 300 | 180 | 300 | 180 |
| 每分鐘行程數 | Speed changing | s.p.m | 20-35 | 30-50 | 20-30 | 20-40 | 18-25 | 20-30 | 15-25 | 20-30 |
| 最大裝模高度 | Max.die he high? | mm? | 550 | 450 | 550 | 450 | 580 | 480 | 600 | 500 |
| 滑塊調整量 | Slide adjustment | mm? | 120 | 120 | 120 | 120 | ||||
| 上工作臺尺寸 | Slide area | mm | 2300×900 | A:2300×1000 | 3000×1000 | 3200×1100 | ||||
| B:2500×1000 | ||||||||||
| C:2900×1000 | ||||||||||
| 下工作臺尺寸 | Bolster area | mm? | 2700×900×170 | A:2500×1000 | 3300×1200 | 3500×1200 | ||||
| B:2800×1000 | ||||||||||
| C:3200×1000 | ||||||||||
| 側向開口 | Side opening | mm? | 900×600 | 900×600 | 1000×750 | 1100×750 | ||||
| 主電動機 | Main motor | kwxP | 30×4 | 37×4 | 45×4 | 55×4 | ||||
| 滑塊調整電機 | Slide adjust device | kwxP | 2×4 | 2×4 | 3×4 | 1×4 | ||||
| 使用空氣壓力 | Air pressure | Mpa | 0.6 | 0.6 | 0.6 | 0.6 | ||||
| 沖床精度 | Presses precision | ? | GB(JIS)1 class一級 | |||||||
| 規格Specification | YDPM-110 | YDPM-160 | YDPM-200 | YDPM-250 | YDPM-300 | YDPM-400 | YDPM-500 | YDPM-600 | |||||||||
| 型式Modle | S | H | S | H | S | H | S | H | S | H | S | H | S | H | S | H | |
| AA | 2300 | 2590 | 3000 | 3600 | 3600 | A:3500/B:3700/C:4100 | 4300 | 4700 | |||||||||
| AB | 2000 | 2240 | 2650 | 3250 | 3250 | A:3150/B:3350/C:3750 | 3900 | 4250 | |||||||||
| AC | 1600 | 1800 | 2200 | 2500 | 2500 | A:2500/B:2800/C:3200 | 3300 | 3500 | |||||||||
| AD | 1700 | 1800 | 2290 | 2800 | 2800 | A:2700/B:2900/C:3300 | 3400 | 3650 | |||||||||
| AE | 1400 | 1600 | 1850 | 2300 | 2300 | A:2300/B:2500/C:2900 | 3000 | 3200 | |||||||||
| BA | 1236 | 1400 | 1600 | 1815 | 1865 | 2050 | 2210 | 2550 | |||||||||
| BB | 1000 | 1200 | 1260 | 1375 | 1505 | 1550 | 1760 | 2200 | |||||||||
| BC | 600 | 700 | 900 | 900 | 900 | 900 | 1000 | 1100 | |||||||||
| BD | 1877 | 2150 | 2800 | 3024 | 3040 | 3164 | 3510 | 3900 | |||||||||
| HA | 930 | 1000 | 1000 | 1150 | 1200 | 1200 | 1345 | 1400 | |||||||||
| HB | 400 | 435 | 450 | 400 | 500 | 450 | 550 | 450 | 550 | 450 | 550 | 450 | 580 | 480 | 600 | 500 | |
| HC | 180 | 110 | 190 | 130 | 250 | 150 | 280 | 170 | 300 | 170 | 300 | 170 | 300 | 180 | 300 | 180 | |
| HD | 3220 | 3400 | 3300 | 4116 | 3966 | 4330 | 4040 | 4535 | 4570 | 4850 | 4650 | 5500 | 5620 | 6100 | 5870 | ||
| HE | 900 | 900 | 940 | 1000 | 1000 | 1150 | 1290 | 1350 | |||||||||
| HF | 450 | 450 | 600 | 600 | 600 | 600 | 750 | 750 | |||||||||
