YDPC系列 YDPC SERIES
雙曲軸精密鋼架沖床 Double-cank precision steel frame press
—高剛性機架設計，采用優質鋼板焊制，經過消除內應力工藝處理，提高了整機精度的穩定性和可靠性能。
—With high rigidity rack desigh,they are welded with the use of high-quality steel plates,through relieving of internal stresses,so that stability and reliability of the whole machine in precision are enhanced.
?
性能特點Performance feature
| 1.高剛性能機架，連桿中心跨度大，抗偏載強，優化設計。 | 1.High steel performance frame,large center span of the connecting rod, strong anti partial load,optimize desigh. | ||||||||||
| 2.為保證機器運轉的相對平穩性，采用對稱兩只平衡器裝置設計方式。 | 2.In order to guarantee relative stationarity of machineoperation,it is necessary to balance two balancers. | ||||||||||
| 3.調模精密高度0.1ｍｍ，安全、便捷、可靠。 | 3.Mouldinh-adjustment precision is as high as 0.1mm,safe,speed,and reliable. | ||||||||||
| 4.曲軸、齒輪組、連桿等部件，經硬氧化和研磨等工藝處理后，具有極高的綜合性能和耐度性 | 4.Through hard oxdation and grinding,such parts as bent axles,gear sets,and connecting rods possess higher combination property and tolerance. | ||||||||||
| 5.采用高度靈敏、可靠的離合器/剎車器裝置和國際頂尖的雙聯電磁閥，過載保護裝置，確保壓力機滑塊運轉及停止的精確性與安全性。 | 5.Adopt highly sensitive and reliable cluth/brake and internationally top duplex magnetic valve,as well as overload protection devices,to guarantee precision and safety for operation and stop of press rams. | ||||||||||
| 6.機器結構設計合理，便于實現自動化生產，降低成本，提高效率。 | 6.Machine's structural design shall be reasonable,for the convenience of realizing automatic production,reducing cost,and improving efficiency. | ||||||||||
| 7.先進的設計理念，低噪音，低消耗，節省能源。 | 7.Possess advance design concepts,low noise,low consumption,and energy saving. | ||||||||||
| 干式離合剎車器 | Dry clutch brake |
| 易鍛標準操作系統 | Standerd operating system of yiduan |
| 運轉模式選擇/切/寸動/安全一行程/連續 | Choice/cutting/inch/safe joumey/continuationof operating mode |
| 油壓過負荷保護裝置 | Oil pressure overload protection device |
| 二度落保護裝置 | Over-run safety device |
| 雙聯電磁閥 | Duplex magnetic valve |
| 誤送檢測裝置 | Misfeed detection consent |
| 電動滑塊調整裝置 | Electric slider adjusting device |
| 數字式模高指示器（單位0.1mm) | Digital moulding-height indicator(unit:0.1mm) |
| 電動黃油潤滑裝置 | Electric butter lubricating device |
| 累計計數器6位數 | Accumlative counter(6 digits) |
| 預調計數器6位數 | Pre-determined counter(6 digits) |
| 保養計數器6位數 | Maintenance counter(6 digits) |
| 壽命計數器6位數 | Life counter(6 digits) |
| 電子式旋轉凸輪開關預備6連 | Electionic rotatry cam switch(6 connection) |
| 噴風裝置1/2H-回路 | Air-blast device 1/2"one circuit |
| 空氣源接頭1/2－－回路 | Air source connector 1/2"two circuit |
| 電源插座 | Power socket |
| 濕式離合剎車器 | Wet clutch brake |
| 模墊裝置 | Die cushion device |
| Vs變速馬達 | Vs variable-speed motor |
| 觸摸屏裝置 | Touch -screem device |
| 光電安全裝置 | Photo-electronic safety device |
| 滑塊上部頂料裝置 | Upper slider feeding device |
| 主馬達逆轉裝置 | Main motor inversion device |
| 腳踏開關 | Foot switch |
| 安全擋塊及安全插銷 | Safety dog and safety latch |
| T型雙手按鈕操作臺 | T-type two-hand button operating floor |
| 附檢知變聯電磁閥 | Inspection variable-connection magnetic valve |
| 防震機械腳 | Anti-vibration mechanical foot |
| 上夾模器 | Rapid tooling exchange |
| 下夾模器 | Upper die clamper |
| 舉模器 | Die lifter |
| 移模臂 | Mould-shift arm |
| 基礎螺絲及基礎板 | Basic bolt and soleplate |
| 自動送料裝置 | Automatic feeder device |
| 三合一NC矯直機 | Three-in-one NC straightening feeder |
| NC滾輪送料機 | NC Roll feeder |
| 二合一料架兼矯直機 | Three-in-one feeder and straightening machine |
| 矯直機（整平機） | Leveller |
技術參數
| 名稱 | Name | 單位 | YDPC-110 | YDPC-160 | YDPC-200 | YDPC-250 | YDPC-300 | |||||||
| 型式 | Model | ? | V型 | H型 | V型 | H型 | V型 | H型 | V型 | H型 | V型 | H型 | ||
| 噸數 | Capacity | ton | 110 | 160 | 200 | 250 | 300 | |||||||
| 能力發生點 | Rated tonnage point | mm? | 5 | 3 | 6 | 3 | 6 | 3 | 7 | 3.5 | 7 | 3.5 | ||
| 行程長 | Stroke | mm? | 180 | 110 | 200 | 130 | 200 | 130 | 250 | 150 | 280 | 170 | ||
| 行程數 | Stable speed | s.p.m | 35-65 | 50-100 | 30-55 | 40-85 | 30-50 | 35-70 | 20-35 | 30-60 | 20-35 | 30-60 | ||
| 最大裝模高度 | Max.die he high? | mm? | 400 | 435 | 450 | 485 | 500 | 550 | 550 | 605 | 550 | 605 | ||
| 滑塊調整量 | Slide adjustment | mm? | 100 | 100 | 100 | 120 | 120 | |||||||
| 下工作臺尺寸 | Bolster area | mm? | 1800×650×130 | 2000×760×150 | 2400×840×170 | 2700×900×170 | 2700×900×170 | |||||||
| 上工作臺尺寸 | Slide area | mm? | 1400×500×70 | 1600×550×70 | 1850×650×95 | 2100×700×95 | 2100×700×95 | |||||||
| 主電動機 | Main motor | kwxP | 11×4 | 15×4 | 18.5×4 | 22×4 | 30×4 | |||||||
| 使用空氣壓力 | Air pressure | Mpa | 0.6 | 0.6 | 0.6 | 0.6 | 0.6 | |||||||
| 沖床精度 | Presses precision | ? | JIS(CNC)1 class一級 | |||||||||||
| 模墊型式 | Die cushion model | ? | Two plate&two cylinders二板雙缸 | |||||||||||
| 模墊能力 | Die cushion capacity | ton | 3.6×2 | 6.3×2 | 10×2 | 14×2 | 14×2 | |||||||
| 模墊行程長 | Stroke | mm? | 80 | 80 | 80 | 100 | 100 | |||||||
| 模墊頂板面積 | Die cushion work part dimension | mm2 | 350×235×2組 | 410×260×2組 | 540×350×2組 | 640×470×2組 | 640×470×2組 | |||||||
| 規格Specofocation | YDPC-110 | YDPC-160 | YDPC-200 | YDPC-250 | YDPC-300 | ||||||
| 型式 Model | V | H | V | H | V | H | V | H | V | H | |
| AA | 2000 | 2200 | 2350 | 2800 | 3000 | ||||||
| AB | 1900 | 2080 | 2230 | 2600 | 2800 | ||||||
| AC | 1360 | 1520 | 1670 | 2000 | 2200 | ||||||
| AD | 1800 | 2000 | 2400 | 2700 | 2700 | ||||||
| AE | 1510 | 1660 | 1780 | 2220 | 2220 | ||||||
| AF | 1400 | 1600 | 1850 | 2100 | 2100 | ||||||
| AG | 1780 | 1980 | 2130 | 2520 | 2590 | ||||||
| BA | 1745 | 1940 | 2130 | 2400 | 2545 | ||||||
| BB | 1295 | 1380 | 1640 | 2050 | 2195 | ||||||
| BC | 650 | 760 | 840 | 900 | 900 | ||||||
| BD | 330 | 385 | 425 | 455 | 488 | ||||||
| BE | 500 | 550 | 650 | 700 | 700 | ||||||
| HA | 630 | 730 | 790 | 820 | 820 | ||||||
| HB | 830 | 865 | 990 | 1025 | 1070 | 1120 | 100 | 1155 | 1100 | 1155 | |
| HC | 400 | 435 | 450 | 485 | 500 | 550 | 550 | 605 | 550 | 605 | |
| HD | 180 | 110 | 200 | 130 | 200 | 130 | 280 | 170 | 280 | 170 | |
| HE | 3059 | 3709 | 3849 | 4305 | 4304 | ||||||
| HF | 1240 | 1440 | 1570 | 1680 | 1680 | ||||||
| ?h | ?35 | ?47 | ?54 | ?54 | ?54 | ||||||
